Fuelly Forums
Page 51 of 87 « First 414950 51 525361 Last »
Show 40 post(s) from this thread on one page

Fuelly Forums (https://www.fuelly.com/forums/)
-   Electric and Solar powered (https://www.fuelly.com/forums/f18/)
-   -   Electric conversion: Project ForkenSwiift (https://www.fuelly.com/forums/f18/electric-conversion-project-forkenswiift-1605.html)

GasSavers_nathan 04-06-2007 08:48 AM
How much are you asking for that torque monster?

MetroMPG 04-06-2007 09:11 AM
I'm going to have it "remotely" evaluated by motor guru

SVOboy 04-06-2007 01:11 PM
Its the weekend! Time for some work, *whipsdarin*

The Toecutter 04-06-2007 10:34 PM
Quote:
We're not going to use it. Need to start thinking about building a battery fund, or something.

Good shape - was serviced in '02. Smooth, clean commutator, good brushes. 4 external terminals (easily reversible). Tailshaft. Comes with big lovejoy coupler which you can modify for your project...

@ 240 lbs, shipping's not going to be cheap though
I'd be especially interested in it if I could get at least 100 HP peak from it.

GasSavers_nathan 04-07-2007 07:41 AM
I'd be especially interested in it if it came installed;)

MetroMPG 04-07-2007 08:48 AM
Sorry, "some assembly required". :)

Silveredwings 04-07-2007 10:28 AM
Quote:
Originally Posted by MetroMPG (Post 46270)
Anybody wanna buy a 12 inch torque monster?

We're not going to use it. Need to start thinking about building a battery fund, or something.

Good shape - was serviced in '02. Smooth, clean commutator, good brushes. 4 external terminals (easily reversible). Tailshaft. Comes with big lovejoy coupler which you can modify for your project...

@ 240 lbs, shipping's not going to be cheap though ;)
What else can you tell us about it (voltage, V-max, amps, shaft type/size, etc.) ? Even the etc.? ;)

If the motor isn't marked, do you know what the original system voltage was?

MetroMPG 04-07-2007 10:52 AM
he forklift was a 36/48v

MetroMPG 04-07-2007 12:26 PM
ell, that wasn't too hard. Got the monster in the garage and took it apart. With 4 major chunks - 2 end caps, the body, and the rotor - shipping may not be impossible after all. Just do it with separate parcels.

Ivan's visiting his out-laws today, and he has a better camera than the antique 1 MP unit I've got. So the quality pics will have to wait until he's back.

MetroMPG 04-08-2007 05:47 PM
Fun with ammeters - making a load tester
 
Played a little this evening with the ammeter.


All times are GMT -8. The time now is 05:33 PM.
Page 51 of 87 « First 414950 51 525361 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2025, vBulletin Solutions, Inc.