d15z1 94 teg
I just completed this swap in my gs-R dc2. You need a p07-A00 ecu, vx motor, with wiring harness and 5 wire o2, extra ecu pins and wire, egr control solenoid. Everything will go together real easy. except for running a couple of wires from the ecu to the engine harness and 02 wires, and a wire from the ecu to the egr control solenoid and then to a sensor ground on the driver side of the car. btw no check engine lights.
(2500lbs. Rear disc, bigger front calipers, abs, sunroof, power steering, leather) vs. (2100lbs. none of that)
I can't tell you how much I'm saving in gas yet just going through my 1st 10gal.
|