Seafoam vs Berryman b12 chemtool

[hypermarquis]

Hello everyone, this is my first thread here and sorry to bring up something old so please don't flame me. I hope it is in the correct forum.

Just curious about what people use. I myself have done the seafoam thing but doubt I ever will again after reading the msds ( listed below). I do use Berryman b12 chemtool in every engine I have (gas tank only) and use oil change intervals as a reminder.

Let us know what you think.
Thank you.


msds....

Berryman-
Acetone 67-64-1 20-30%
2-Butoxyethanol 111-76-2 <5%
Isopropyl Alcohol 67-63-0 <5%
Methanol 67-56-1 20-30%
Methyl Ethyl Ketone 78-93-3 <5%
Toluene 108-88-3 40-50%


seafoam-
Pale Oil 64742-54-7 40.00 - 60.00 %
Naphtha 64742-49-0 25.00 - 35.00
IPA 67-63-0 10.00 - 20.00

[trollbait]

I have seen a home mix for Seafoam of 4 parts diesel: 2 parts gasoline : 1 part IPA.

Most of the Berryman components can be found in the paint section of a hardware store.

I have used the Seafoam mix for gasoline stabilizer. IIRC, it's 1oz per gallon on the Seafoam can. If I ever get a PCV catch can together for my wife's car, I'll use it to can out the intake system. Plenty of oil has gotten into it.