helga's project log

[GasSavers_Diemaster]

well evreyone else has one so i thought i'd start one.

Yesterday:
got obd0 to obd1 dizzy adapter.


today:
got dizzy and 20 mins later got it in helga and running. got a CEL 41 o2 heater witch i havent put in yet.

i'll get pics up later, proably tomarow.

[SVOboy]

You can run a 1k resistor from POWA to A6 to get rid of that code 41.

[GasSavers_Diemaster]

whats POWA? power?

[SVOboy]

Power it is.

[GasSavers_Diemaster]

well it runs and runs good. no cels no power loss. but no TC lockup and no let me out of park sucks. wish i was manual to begin with like matt

[SVOboy]

Wire up your TC to a constant 12v power, but only have it on when you're running the car or it'll drain the battery.

[GasSavers_Diemaster]

well she has her period now. cel on and got codes 7 13 15 16 20 on obd0 and wont start for **** on obd1. going to look at it this weekend.

[GasSavers_Diemaster]

well i found the obd1 no start problem.... the epoxy split wide open and the coil oozed it;s internals out. no obd1 till i figure out the waranty





fixed helgas period too. she just had a bad computer ground. witch explains why all the sensors that had a common ground gave faults. so obd0 is fixed now.

i got a clear dizzy cover for obd1 but alas becouse of the problem stated above i got no spark.

[SVOboy]

Haha, I saw the clear dizzy cover in autozone today and laughed at the sucker who would buy one.

[GasSavers_Diemaster]

i dont think of it as rice. if u have a no start conditon, u can se at a glimps if the dizzys working or not. on obd0 the rotor fals off bout evrey 200 miles. so sorta same thing for obd1.

just added pics as soon as it's running i'll post pics of the whole setup.