D15Z1 Engine swap project log - Fuelly Forums

D15Z1 Engine swap project log - Fuelly Forums

Click here to see important news regarding the aCar App

		Fuelly Forums > Tech, Troubleshooting and Repair > General Maintenance and Repair
D15Z1 Engine swap project log

Click Here to Login

Matt Timion D15Z1 Engine swap project log 05-07-2006, 07:19 PM

Matt Timion The swap will begin tomorrow 06-04-2006, 10:14 PM

krousdb A party celebrating the... 06-05-2006, 01:30 AM

GasSavers_DaX HA! I've got a wedding this... 06-05-2006, 04:33 AM

Matt Timion If they are that cheap I'll... 06-05-2006, 06:07 AM

Matt Timion I purchased a set of punches... 06-05-2006, 12:40 PM

MakDiesel I want hardcore details on... 06-05-2006, 06:51 AM

Matt Timion I'll give you as much as... 06-05-2006, 07:39 AM

GasSavers_DaX $130 for plug-and-play? Will... 06-05-2006, 09:12 AM

Matt Timion $130 for the conversion... 06-05-2006, 09:19 AM

MakDiesel I've checked the site, they... 06-15-2006, 11:20 AM

GasSavers_DaX Personally, I say that if... 06-15-2006, 11:29 AM

Matt Timion If you like wiring, just get... 06-15-2006, 11:32 AM

More replies below current depth...

Matt Timion more work done today. I'm... 06-08-2006, 02:53 PM

95metro Nice work, Matt. I'm... 06-08-2006, 03:21 PM

Gary Palmer Matt: Glad to see you got the... 06-08-2006, 04:05 PM

More replies below current depth...

thisisntjared removing the radiator yes ... 06-08-2006, 04:26 PM

GasSavers_DaX My thoughts exactly. I've... 06-09-2006, 03:58 AM

Matt Timion YAY! Wiring is done...... 06-17-2006, 07:04 PM

Matt Timion Started the day convinced I'd... 06-18-2006, 11:25 PM

Compaq888 well that sucks. Hopefully... 06-19-2006, 12:22 AM

GasSavers_Jack DON'T DO IT. When I replaced... 06-19-2006, 06:51 AM

LincolnW Nice progress! That sucks... 06-19-2006, 07:26 AM

Matt Timion I think for now I'm just... 06-19-2006, 09:01 AM

Matt Timion Engine is in ... 06-20-2006, 11:31 AM

Matt Timion Going to the junkyard in a... 06-23-2006, 01:05 PM

thisisntjared yup. it will save you hours... 06-23-2006, 01:47 PM

Bunger Which B pipe do you have? If... 06-23-2006, 02:21 PM

Matt Timion Not exactly sure what a B... 06-23-2006, 02:53 PM

Matt Timion OMG! I spent all day... 06-24-2006, 03:50 PM

kwtorbe I had a similar issue. I had... 03-11-2007, 05:31 PM

Gary Palmer Matt: Just a note and a... 06-05-2006, 09:21 AM

Matt Timion Just removed the b-pin. The... 06-07-2006, 08:35 AM

SVOboy Must take pictures of mine... 06-07-2006, 12:27 PM

Compaq888 Car parts or some kind of... 06-07-2006, 01:13 PM

Matt Timion seriously, please read the... 06-07-2006, 04:37 PM

More replies below current depth...

Gary Palmer Matt: If you haven't already... 06-07-2006, 01:25 PM

SVOboy I have plenty of regular... 06-07-2006, 02:54 PM

SVOboy How's the swap coming, I just... 06-07-2006, 04:40 PM

SVOboy Ah, well I dunno where, that... 06-07-2006, 05:04 PM

GasSavers_DaX Why are you trying to remove... 06-07-2006, 05:39 PM

thisisntjared yea dax is giving you the... 06-07-2006, 07:44 PM

Matt Timion Compressor, sorry. I'm... 06-07-2006, 11:06 PM

MetroMPG Nice work, Matt. I love your... 06-07-2006, 07:50 PM

GasSavers_DaX There are four 12 mm bolts... 06-08-2006, 04:30 AM

Matt Timion Cool. Just looked at the... 06-08-2006, 06:23 AM

MakDiesel Question: If the old motor... 06-09-2006, 07:11 AM

GasSavers_Jack I think so. Take a look on... 06-09-2006, 07:47 AM

Matt Timion They will swap without a... 06-09-2006, 07:48 AM

Gary Palmer Matt: In thinking about... 06-09-2006, 07:55 AM

Matt Timion That was part of the problem.... 06-09-2006, 08:02 AM

Gary Palmer Well, to be honest, every... 06-09-2006, 08:08 AM

Matt Timion I really hope that I don't... 06-09-2006, 08:22 AM

Gary Palmer Matt: I don't think their is... 06-09-2006, 08:33 AM

More replies below current depth...

SVOboy Matt, I don't have anything... 06-09-2006, 11:29 AM

Matt Timion Just redid all of my solders... 06-10-2006, 01:16 PM

Compaq888 more pics please 06-10-2006, 02:51 PM

GasSavers_DaX Keep going Matt! Check out... 06-12-2006, 05:00 AM

Matt Timion Thanks. I did more wiring... 06-12-2006, 05:06 AM

GasSavers_DaX Definately. But the finished... 06-12-2006, 05:49 AM

Matt Timion I was just telling Compaq via... 06-12-2006, 05:57 AM

SVOboy C'mon people you can do your... 06-15-2006, 01:36 PM

MakDiesel I am just now beginning to... 06-16-2006, 07:12 AM

GasSavers_DaX Matt - That sucks about... 06-19-2006, 04:45 AM

SVOboy Yay for matt! You're one... 06-19-2006, 05:39 AM

Matt Timion The engine is in... hooray! ... 06-19-2006, 11:09 PM

SVOboy F looks like the fuel return... 06-20-2006, 11:36 AM

Bunger A: Gets vacuum somewhere over... 06-20-2006, 11:43 AM

LincolnW Beat me to it! Except I... 06-20-2006, 12:13 PM

Bunger Yea, only one of those hoses... 06-20-2006, 12:40 PM

Matt Timion The only problem is that... 06-20-2006, 01:30 PM

Bunger Yep, E would be my choice.... 06-20-2006, 01:56 PM

LincolnW Yup. Vacuum is vacuum. :)... 06-20-2006, 01:58 PM

Matt Timion Eh, broken sensors are an... 06-20-2006, 03:51 PM

More replies below current depth...

GasSavers_DaX I'm so excited for you Matt! ... 06-20-2006, 02:35 PM

Matt Timion You mean once your engine is... 06-20-2006, 03:48 PM

SVOboy I usually use my finger... 06-21-2006, 05:42 AM

Bunger Honda exhaust systems (from... 06-23-2006, 03:34 PM

Matt Timion It is near the rear x-member 06-23-2006, 05:32 PM

Bunger Ok, then you'll either want... 06-23-2006, 05:37 PM

SVOboy Air gun. If you don't have... 06-24-2006, 03:54 PM

Matt Timion This would be the perfect... 06-24-2006, 04:00 PM

Bunger I've swapped 4-5 racks in the... 06-25-2006, 11:55 AM

SVOboy Just ziptie the pump on then,... 06-24-2006, 04:03 PM

Matt Timion you're forgetting that this... 06-25-2006, 01:00 AM

Matt Timion Once again, the engine is... 06-25-2006, 06:36 PM

Matt Timion And the engine is back in...... 06-25-2006, 10:22 PM

Matt Timion ALright... the new dilemna is... 06-27-2006, 06:19 PM

Bunger Is it the fuel line or the... 06-27-2006, 06:44 PM

Matt Timion It's one or the other. Here... 06-27-2006, 08:47 PM

MakDiesel for the crank pulley... 06-25-2006, 09:24 AM

Matt Timion IN short, the axles are not... 06-25-2006, 03:09 PM

SVOboy Hook up the axles, it only... 06-25-2006, 03:15 PM

krousdb After following this saga, I... 06-26-2006, 01:39 AM

Compaq888 you could just swap the cx... 06-26-2006, 02:19 AM

Matt Timion In all honesty I'm having... 06-26-2006, 07:43 AM

krousdb A CX Tranny swap won't enable... 06-26-2006, 05:36 AM

GasSavers_DaX Yeah, you might be able to... 06-26-2006, 05:42 AM

Compaq888 If you would of lived closer... 06-26-2006, 06:11 AM

krousdb Yes, good condition, no rust.... 06-26-2006, 06:39 AM

Compaq888 Interesting Idea. But... 06-26-2006, 09:39 AM

SVOboy Oh Matt, it's okay!... 06-26-2006, 07:47 AM

Matt Timion I was actually telling my... 06-26-2006, 07:57 AM

Gary Palmer Matt: You know when I... 06-26-2006, 08:53 AM

Matt Timion LOL I'm actually thinking... 06-26-2006, 08:55 AM

Gary Palmer Drill the holes and if it's... 06-26-2006, 09:18 AM

Matt Timion more done 06-26-2006, 08:37 PM

Gary Palmer Maybe you should build a... 06-27-2006, 09:00 AM

Bunger I think I have the fuel line... 06-27-2006, 10:33 PM

Matt Timion If you have pictures I'd love... 06-28-2006, 07:12 AM

Matt Timion here ya go ... 06-28-2006, 07:26 AM

95metro Matt, is that existing tube... 06-28-2006, 08:01 AM

Bunger I'll check this morning if I... 06-28-2006, 08:47 AM

More replies below current depth...

Matt Timion No dice. I installed the... 06-28-2006, 07:47 PM

Matt Timion Argh 06-29-2006, 07:34 PM

More replies below current depth...

SVOboy Spare Vx Motor!? 06-28-2006, 07:09 AM

SVOboy If you sell matt the fuel... 06-28-2006, 07:17 AM

SVOboy What about my engine? :'( 06-28-2006, 09:20 AM

krousdb I think he is ignoring you... 06-28-2006, 09:25 AM

Bunger My spare VX motor is about to... 06-28-2006, 09:37 AM

MakDiesel I'm guessing you'll sell it... 06-28-2006, 10:01 AM

Matt Timion Heh... I post on... 06-28-2006, 10:29 AM

MakDiesel The Swap List 06-28-2006, 10:42 AM

Matt Timion I'll make a list for you... 06-28-2006, 10:57 AM

GasSavers_DaX Do you have two fuel lines? ... 06-28-2006, 11:08 AM

Matt Timion Just got back from the... 06-28-2006, 04:59 PM

SVOboy Get the cap at autozone, that... 06-28-2006, 07:49 PM

GasSavers_DaX I would recommend filling at... 06-29-2006, 03:50 AM

Matt Timion The problem of course, is... 06-29-2006, 08:36 AM

Gary Palmer Matt: If that doesn't work,... 06-29-2006, 09:11 AM

bagpipe goatee good luck on the fill hole. ... 06-29-2006, 09:12 AM

Matt Timion I would generally like to NOT... 06-29-2006, 09:19 AM

Gary Palmer I agree with you. I wouldn't... 06-29-2006, 09:25 AM

SVOboy From what I gathered from him... 06-30-2006, 06:30 AM

Matt Timion Wiring is correct on the... 06-30-2006, 08:16 AM

MakDiesel keep at it! I could have... 06-30-2006, 07:18 AM

Gary Palmer Matt: The question SVOboy... 06-30-2006, 08:18 AM

Matt Timion Okay... Car is in nuetral.... 06-30-2006, 11:06 AM

Matt Timion I have spark, at least on... 06-30-2006, 01:03 PM

Gary Palmer From what I've read, for OBD1... 06-30-2006, 08:27 AM

Matt Timion You're right. no resistor... 06-30-2006, 08:32 AM

Gary Palmer Timing isn't that difficult. ... 06-30-2006, 08:30 AM

Matt Timion Unless my transmission is... 06-30-2006, 08:34 AM

Gary Palmer Don't forget to put the... 06-30-2006, 08:36 AM

Matt Timion Heh... this IS a new seal. I... 06-30-2006, 08:38 AM

Gary Palmer Matt: You have a manual... 06-30-2006, 08:40 AM

Matt Timion That is my point. If the... 06-30-2006, 08:42 AM

SVOboy The reason he said about in... 06-30-2006, 08:43 AM

Gary Palmer If it is a new seal, you... 06-30-2006, 08:43 AM

Gary Palmer On the clutch, the switch is... 06-30-2006, 08:44 AM

Matt Timion Yes... we seem to have a... 06-30-2006, 08:53 AM

SVOboy Do EFs have a clutch switch? 06-30-2006, 08:46 AM

Gary Palmer Matt: All I'm trying to say... 06-30-2006, 08:49 AM

Gary Palmer If I understand correctly, he... 06-30-2006, 08:51 AM

Gary Palmer Ok, so what your saying is he... 06-30-2006, 08:53 AM

Gary Palmer Ah well, enough questions and... 06-30-2006, 08:54 AM

Matt Timion see post above 06-30-2006, 08:55 AM

SVOboy But if his car is in 5th or... 06-30-2006, 08:51 AM

SVOboy Ah, that's true, I forget. I... 06-30-2006, 08:52 AM

SVOboy You can hop under the car and... 06-30-2006, 08:57 AM

Gary Palmer Matt: My problem wasn't that... 06-30-2006, 09:00 AM

Matt Timion Very true. Communication... 06-30-2006, 09:11 AM

GasSavers_DaX The distributor can only go... 06-30-2006, 11:06 AM

Matt Timion Huh? I asked if there is... 06-30-2006, 11:25 AM

GasSavers_DaX Were you grounding the plug... 06-30-2006, 11:29 AM

Matt Timion Word. I'll do this when it's... 06-30-2006, 11:32 AM

Gary Palmer Matt: I don't mean to be a... 06-30-2006, 01:26 PM

Matt Timion Good advice. I should just... 06-30-2006, 01:30 PM

Gary Palmer Matt: If you can arrange it,... 06-30-2006, 01:38 PM

Matt Timion LOL! Not only do i live in... 06-30-2006, 01:45 PM

krousdb Congrats Matt. My *** hurts... 06-30-2006, 01:49 PM

95metro Congrats, Matt. Glad is was... 06-30-2006, 01:55 PM

Compaq888 It's always something so... 06-30-2006, 02:27 PM

Gary Palmer Awesome!! 06-30-2006, 01:53 PM

thisisntjared AWESOME!!!! congrats!!! 06-30-2006, 08:30 PM

SVOboy Did I tell you to check it? I... 06-30-2006, 10:12 PM

Matt Timion Eh, coulda been. I can't... 06-30-2006, 11:16 PM

Matt Timion Looks like this chapter may... 07-03-2006, 01:50 PM

Matt Timion IT RUNS! And it runs... 07-03-2006, 05:52 PM

95metro Okay, this is corny, but I... 07-04-2006, 06:49 AM

LincolnW Hahha.... Nice!! At least... 07-04-2006, 08:51 AM

Matt Timion Hopefully I'll get used to... 07-04-2006, 08:56 AM

SVOboy I shift into 5th at 30, 3rd... 07-04-2006, 09:26 AM

Matt Timion I tried engaging vtec in... 07-04-2006, 09:27 AM

SVOboy Are you sure it didn't... 07-04-2006, 09:29 AM

Bunger Its really hard to tell if... 07-04-2006, 10:27 AM

Matt Timion Yeah, I think it's probably... 07-04-2006, 12:25 PM

SVOboy Vtec light, haha, *sigh* 07-04-2006, 12:26 PM

Matt Timion uhm, wtf? 07-04-2006, 12:28 PM

SVOboy Sorry, just teasing, I've... 07-04-2006, 12:32 PM

krousdb In my short experience with a... 07-04-2006, 10:29 PM

MakDiesel You may kill two birds w/ the... 07-05-2006, 09:14 AM

Matt Timion Mak, I posted on your... 07-05-2006, 09:22 AM

MakDiesel Thanks again. I didn't see... 07-06-2006, 08:56 AM

molecule if anyone is interested i... 07-20-2006, 11:25 AM

Matt Timion Very good deal... BTW, where... 07-20-2006, 11:54 AM

Matt Timion Speedometer doesn't work. ... 08-14-2006, 09:34 PM

Gary Palmer Molecule: I would be very... 07-20-2006, 01:53 PM

Gary Palmer Anyone have any idea what... 07-20-2006, 01:56 PM

krousdb I think SVOboy would be... 07-20-2006, 01:59 PM

Gary Palmer He wouldbe a lot closer than... 07-20-2006, 02:01 PM

molecule i'm in cleveland... the... 07-20-2006, 06:34 PM

Matt Timion Just adjusted my idle... it... 08-12-2006, 12:16 PM

krousdb How do you adjust the idle? 08-12-2006, 12:18 PM

Matt Timion The idle screw on the... 08-12-2006, 12:34 PM

Matt Timion Just got myself a new... 08-13-2006, 01:53 PM

krousdb Those seals are hard to find.... 08-13-2006, 02:13 PM

Matt Timion I got mine from Honda too...... 08-13-2006, 07:03 PM

SVOboy Where's my throttle cable, :p... 08-13-2006, 01:59 PM

SVOboy HF tranny, want me to send... 08-13-2006, 02:15 PM

GasSavers_DaX I'd use a brand new one...not... 08-13-2006, 06:50 PM

SVOboy You'll get it! It's prolly... 08-14-2006, 09:40 PM

Matt Timion Considering how much I pulled... 08-14-2006, 09:50 PM

Matt Timion Okay... I put a new axle... 08-17-2006, 03:14 PM

lovemysan Use OEM or a good quality... 08-18-2006, 06:00 AM

Matt Timion I've only used OEM seals. ... 08-18-2006, 07:30 AM

Compaq888 For my car I only get parts... 08-18-2006, 08:13 AM

GasSavers_DaX For anyone working on putting... 08-19-2006, 04:44 AM

GasSavers_Jack I have hard enough time... 08-18-2006, 07:02 AM

SVOboy The teg cluster beckons you! 08-17-2006, 03:15 PM

Matt Timion I would be all over the teg... 08-17-2006, 03:18 PM

SVOboy Blast it with some heat then,... 08-17-2006, 03:19 PM

Matt Timion Maiden voyage was a total... 08-18-2006, 02:18 PM

Ted Hart Matt- This is Ted Hart. I... 08-23-2006, 11:18 AM

Matt Timion the d15z1 went into my 89... 08-23-2006, 02:34 PM

MakDiesel finally got pics of my Z1... 08-31-2006, 12:22 PM

Matt Timion It still probably won't fit. ... 08-31-2006, 10:19 PM

GasSavers_DaX The 2x4 method is teh win! 09-01-2006, 03:57 AM

Matt Timion Just put in an order for a... 09-26-2006, 08:30 AM

8Civic8 Matt, I had a few questions... 09-04-2006, 01:57 PM

Matt Timion [QUOTE=8Civic8]1. As far as... 09-04-2006, 10:36 PM

8Civic8 Thank you for your reply. You... 09-05-2006, 06:22 PM

Matt Timion Throttle cable. Your current... 09-05-2006, 06:58 PM

8Civic8 Matt, Thanks for the info. ... 09-09-2006, 01:35 PM

Matt Timion Honda Tech requires you to be... 09-09-2006, 02:46 PM

8Civic8 So i got the egr control box... 09-13-2006, 10:43 PM

8Civic8 Whats the difference between... 09-27-2006, 04:15 PM

Matt Timion DOn't know how to tell the... 09-27-2006, 06:52 PM

GasSavers_DaX If the CA model does not use... 09-28-2006, 04:19 AM

8Civic8 How do the processors look. I... 09-29-2006, 09:19 PM

Matt Timion I think the best bet is... 09-29-2006, 10:14 PM

GasSavers_TomO 8Civic8, check your ECU label... 03-12-2007, 07:56 AM

78si I'm almost done swaping my VX... 09-13-2007, 09:17 PM

MakDiesel Same here, but in my '89 CRX... 10-02-2007, 03:37 PM

GasSavers_Diemaster Re: D15Z1 Engine swap project... 05-07-2006, 09:50 PM

Matt Timion Re: D15Z1 Engine swap project... 05-07-2006, 09:54 PM

GasSavers_DaX Awesome. I'm glad the 05-08-2006, 05:33 AM

Compaq888 interesting method. 05-08-2006, 09:47 AM

Matt Timion Re: interesting method. 05-08-2006, 10:54 AM

mikefxu That engine/trans is in 05-08-2006, 05:33 PM

GasSavers_Diemaster nippon motors. 05-08-2006, 09:38 PM

Matt Timion Re: nippon motors. 05-08-2006, 10:04 PM

budomove hf tranny 05-09-2006, 08:50 PM

budomove Sorry, uhHH Matt (Tim)mion 05-09-2006, 08:53 PM

Matt Timion Re: Sorry, uhHH Matt (Tim)mion 05-09-2006, 09:23 PM

SVOboy Quote:You might want to talk 05-09-2006, 09:29 PM

GasSavers_DaX Re: Sorry, uhHH Matt (Tim)mion 05-11-2006, 04:00 AM

SVOboy Quote:I'm actually through! 05-11-2006, 02:40 PM

GasSavers_Randy Re: nippon motors. 05-11-2006, 09:21 PM

Matt Timion Re: nippon motors. 05-11-2006, 09:30 PM

gamby FWIW, I bought my d16z6... 11-14-2007, 07:20 AM

GasSavers_Diemaster Re: nippon motors. 05-11-2006, 10:26 PM

SVOboy Quote:I've actually seen 05-12-2006, 04:24 AM

GasSavers_DaX Re: Quote:I'm actually... 05-12-2006, 05:51 AM

thisisntjared Re: nippon motors. 05-12-2006, 06:53 AM

Matt Timion Re: Quote:I've actually seen 05-12-2006, 08:27 AM

thisisntjared your really paying for peace 05-12-2006, 12:38 PM

Matt Timion Re: your really paying for... 05-12-2006, 02:17 PM

GasSavers_Diemaster *chanting croud* WE WANT 05-12-2006, 07:13 PM

Matt Timion Re: *chanting croud* WE WANT 05-13-2006, 12:32 AM

Prev

Previous Post

Next Post

Next

06-08-2006, 04:26 PM	#9
thisisntjared \|V3\|2D Join Date: Mar 2006 Posts: 1,186	removing the radiator yes master cylinder no, waaaay too annoying. __________________ don't waste your time or time will waste you

« What the difference between VX and SI seats? 1992-1995 | 560 mile road trip coming up, predict my range »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are Off Refbacks are Off Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gearbox dropdown greyed out; missing engines?	synergist	Fuelly Web Support and Community News	2	09-05-2013 07:48 AM
Small issue with fuel entry, leading zero	metalfan49	Fuelly Web Support and Community News	1	08-07-2013 07:08 AM
Total Liters	recon9	Fuelly Web Support and Community News	2	09-17-2009 09:07 PM
Incorrect Milage Calcuatlion	PatM	Fuelly Web Support and Community News	4	07-17-2009 07:21 PM
The Honda Fit	GasSavers_DaX	General Fuel Topics	54	05-13-2006 12:52 AM

» Car Talk & Chit Chat
Car Selection
The best mpg possible
Mini Stats year 2025 missing
Is Fuelly no longer being updated?
Goodbye Fuelly - Tired of the lack of...

» Fuelly iOS Apps
SQL Restore Instructions

» Fuelly Android Apps
Can not log in

Powered by vBadvanced CMPS v3.2.3

All times are GMT -8. The time now is 11:31 PM.